Innovatek

Oil-based coolant

COOLING WITH OIL-BASED COOLANT

In addition to the water/glycol-based coolants, we also offer oil-based alternatives (mineral, ester or siloxane oil) with our innovatek Dielectric Coolant coolants.

In contrast to the coolants of the Protect family, these are dielectric and can therefore directly absorb the waste heat from the electrical components without the use of additional heat sinks and insulators – even at very high voltages, as is the case, for example, with very powerful charging cables for electric vehicles (e-mobility). Even cooling in the megawatt range (e.g. for electric trucks and buses) is no problem with our high-quality cooling oils.

Of course, our cooling oils are also fully convincing due to their excellent durability as well as their corrosion protection of different metals (e.g. aluminium and copper), whereby these vary depending on the cooling oil used.

We currently offer six oil-based coolants in our range:

Due to different environmental variables as well as requirements, the choice of the appropriate coolant is particularly important, as only with the help of a coolant that is optimally matched to the cooling system can the cooling performance and longevity of the cooling system be guaranteed.

Especially for the cooling of powerful charging stations, the use of a cooling system as well as charging cables with cooling oil is an effective and, above all, also future-proof alternative.

Our coolant can be ordered from us in various container sizes and variants. You will find containers with a capacity of 5 litres in our online shop.

Environmental protection

Environmental protection is an important concern for us, which is why our mineral and ester-based coolants are biodegradable. In addition, our siloxane-based cooling oils and Dielectric Coolant E 7.7 can be used without any labelling requirements.

Dielectric Coolant in comparison

M-Series

Mineral oil base
• Good cooling capacity
• Dielectric
• Protects 100 % against corrosion
• Suitable for use with non-ferrous metals*
• Limited material compatibility**
• Cost-effective and universally applicable
• High long-term stability
• Biodegradable

E-Series

Ester-based
• Average cooling capacity
• Dielectric
• Protects 100 % against corrosion
• Suitable for use with non-ferrous metals*
• Limited material compatibility**
• High long-term stability
• Well biodegradable

S-Series

Siloxane-based
• Low cooling capacity
• Dielectric
• Protects 100 % against corrosion
• Suitable for use with non-ferrous metals*
• Very good material compatibility
• Low viscosities possible
• Cost intensive
• Very high long-term stability

* e.g. copper and aluminium
** Mineral oil e.g. not compatible with EPDM, ester oil e.g. not compatible with PU

Of course, you can order our high-quality innovatek Dielectric Coolant coolants directly in our online shop or contact us by e-mail or phone if you need special containers or different sizes. An EU-compliant data sheet for our coolants can of course also be found in our online shop.

Please feel free to contact us at any time by phone or e-mail if you are interested.

We look forward to your project!

MADE IN GERMANY


We develop and produce in Germany.

Intelligent cooling technology and heat control!

Cookie Consent with Real Cookie Banner